AH 0608®L – Air Cooled Oil Cooler \ Oil Cooler Manufacturers

These are heavy-duty Plate and Fin type Oil coolers. These are heat exchangers that use ambient air to cool fluids – oils, thermic fluids, coolants, non-corrosive fluids, etc. That is to say, that heat exchange takes place between the hot fluid & the cool ambient air. Typically on the oil side, there are internal fins or internal turbulators between two plates. On the air side, there are external fins (or external turbulators) between two plates. The heat from the fluid or oil is picked up by the tabulators or internal fins & transferred to the plates. The plates in turn transfer the heat to the external fins. The cool ambient air provided by the fan removes the heat from the external fins. The internal & external fins not only help increase the surface area but also bring about the turbulence of the two fluids resulting in better cooling effectiveness. The fins / turbulators also help in giving mechanical strength to the heat exchanger.

AH 0608®L – Air Cooled Oil Cooler \ Oil Cooler Manufacturers Specifications

• AH 0608®L
• Oil Flow – 3-60 LPM
• Oil Cooling Capacity – Upto 2500 Kcal/h (3 kW)
• Application: These hydraulic oil air coolers / air cooled heat exchangers are best suited for small hydraulic power packs, gearboxes, die/mould cooling, and drain Line cooling of high-pressure Variable Displacement pumps.
• These can be used in applications where there is a steady oil flow of up to 60 LPM (Max pressure 15 bar). The plate-fin design of the AH series can handle pulsations or variations in the flow better in comparison to AW & AL series.